|
Dr. Güngör > Akademik Çalışmalar ve Yayınlar |
Pamukkale Üniversitesi, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümü
Tel: 0.258.2134030 x 1649 (iş)
e-posta: askiner@pamukkale.edu.tr; Internet: http://agungor.pamukkale.edu.tr/index.html
Yönetilen Yüksek Lisans Tezleri:
§ Yetkin Ekren, B. “Evsel Katı Atık Toplama Araçlarının Rotalanması: Denizli İli’nde Bir Pilot Çalışma”, Pamukkale Üniversitesi Fen Bilimleri Enstitüsü, 2004.
§ Çörekçioğlu, M. “Dokuma Tezgahlarında Bir İş Yükleme / Çizelgeleme Modelinin Kurulması”, Pamukkale Üniversitesi Fen Bilimleri Enstitüsü, 2004 -. (devam ediyor)
§ Kordon, E. “Bireysel Kariyer Planlama”, Pamukkale Üniversitesi Fen Bilimleri Enstitüsü, 2004 -. (devam ediyor)
Projelerde Yaptığı Görevler :
§ Çevreye Duyarlı Bakış Açısı İle Tekstil Ürünlerinin Yaşam Döngülerinin Analizi, TÜBİTAK Projesi, MAG, Proje Yöneticisi, 2005- . (Devam adiyor)
§ Üretimde Performans Ölçütlerinin Belirlenmesi, PAÜ Döner Sermaye Projesi, Küçüker Tekstil San. ve Tic..A.Ş., Denizli, Proje Yöneticisi, 2004.
§ Egekom GMS Yazılımı, KOSGEB PAÜ Tekmer Destekli Egekom Ltd. Şti. AR-GE Projesi, Denizli, Danışmanlık, 2003-2005.
§ Tuvalet Kağıdı Tuvalet Kağıdı Kalite ve Standartlarının İmalat Sırasında Uygulanacak Katkı Maddeleri ile Geliştirilmesi, TTGV ve TİDEB Projesi, Dentaş Kağıt San.A.Ş., Denizli, Danışmanlık, 2002-2004.
§ Egecom - Resource Planner, Egecom Ltd. Şti. Yazılım Projesi, TTGV Projesi, Cyberpark, Ankara, Danışmanlık, 2005. (Proje TTGV’de sözleşme aşamasında)
İdari Görevler :
Bölüm Başkan Yrd. Pamukkale Üniversitesi Endüstri Müh. Bölümü 2000 –
Profesyonel Görevler :
§ Hakemlik, International Journal of Production Research.
§ Hakemlik, IEEE Transactions on Systems, Man, and Cybernetics: Part C.
§ Hakemlik, OR Spectrum.
§ Hakemlik, ASME International Design Engineering Technical Conferences, 2004.
§ Yayım Kurulu Üyesi, Pamukkale Üniv. Mühendislik Bilimleri Dergisi, 2001 – 2005.
Bilimsel ve Profesyonel Kuruluşlara Üyelikler :
• Sigma Xi, The Scientific Research Society
• Alpha Pi Mu, The Industrial Engineering Honor Society
• TMMOB, Türkiye Makine Mühendisleri Odası
• PAÜ Endüstri Mühendisliği Öğrenci Kulübü Danışmanı
Ödüller :
• Yayın Teşvik Ödülü, TÜBİTAK UBYT Programı, 2005.
• Yayın Teşvik Ödülü, TÜBİTAK UBYT Programı, 2001.
• Outstanding Research Associate Award, LRM, Northeastern University, Boston, MA, USA, 1999.
• Who’s Who in Science and Engineering, 2002-2003 baskısına dahil edildi.
ESERLER
A. Uluslararası hakemli dergilerde yayımlanan makaleler :
A1. Güngör, A. “Evaluation of connection types in design for disassembly (DFD) using analytic network process (ANP)”, Computers and Industrial Engineering. 50, 35-54 (2006).
A2. Aydın, A.O. & A. Güngör, “Effective relational database approach to represent bills-of-materials", International Journal of Production Research, 43(6), 1143-1170 (2005).
A3. Güngör, A. & S.M. Gupta, “Disassembly line in product recovery”, International Journal of Production Research, 40(11), 2569-2589 (2002).
A4. Moore, K.E., A. Güngör & S.M. Gupta, “Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships”, European Journal of Operational Research, 135(2), 428-449 (2001).
A5. Güngör, A. & S.M. Gupta, “Disassembly sequence plan generation using a branch-and-bound algorithm”, International Journal of Production Research, 39(3), 481-509 (2001).
A6. Güngör, A. & S.M. Gupta, “A solution approach to the disassembly line balancing problem in the presence of task failures.”, International Journal of Production Research, 39(7), 1427-1467 (2001).
A7. Gungor, A. & S.M. Gupta, “Issues in environmentally conscious manufacturing and product recovery: a survey”, Computers and Industrial Engineering, 36, 811-853 (1999).
A8. Moore, K.E., A. Gungor & S.M. Gupta, “A Petri net approach to disassembly process planning”, Computers and Industrial Engineering, 35(1-2), 165-168 (1998).
A9. Gungor, A. & S.M. Gupta. “Disassembly sequence planning for products with defective parts in product recovery”, Computers and Industrial Engineering, 35(1-2), 161-164 (1998).
A10. Gungor, A. & S.M. Gupta, “An evaluation methodology for disassembly processes”, Computers and Industrial Engineering, 33(1-2), 329-332 (1997).
B. Uluslararası bilimsel toplantılarda sunulan ve bildiri kitabında (Proceedings) basılan bildiriler :
B1. Gungor, A. & S. M. Gupta. “Disassembly line balancing”, Northeast Decision Sciences Institute - 28th Annual Meeting, Newport, Rhode Island, March 24-26, 1999.
B2. Gungor, A. & S. M. Gupta. “A systematic approach to the disassembly line balancing problem”, Proceedings of the International Symposium on Computers and Industrial Engineering, New Orleans, LA, March 29-31, 1999.
B3. Moore, K.E., A. Gungor & S.M. Gupta. “Disassembly Petri net generation in the presence of XOR precedence relationships”, Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, San Diego, California, October 11-14, pp. 13-18, 1998.
B4. Moore, K.E., A. Gungor & S.M. Gupta. “Disassembly process planning using Petri nets”, Proceedings of the IEEE International Symposium on Electronics and the Environment, Oak Brook, IL, pp. 88-93, 1998.
B5. Gungor, A. & S. M. Gupta. “Disassembly sequence planning for complete disassembly in product recovery”, Northeast Decision Sciences Institute - 27th Annual Meeting, Boston, Massachusetts, March 25-27, pp. 250-252, 1998.
C. Yazılan uluslararası kitaplar veya kitaplarda bölümler :
D. Ulusal hakemli dergilerde yayımlanan makaleler :
D1. Aydın, A.O. & A. Güngör. “Kitlesel Kişiselleştirme Sistemlerinde Ürün Ağaçlarının İlişkisel Veritabanı Kullanımıyla Gösterimi”, Endüstri Mühendisliği, 14(4), 2-13, Aralık 2003.
E. Ulusal bilimsel toplantılarda sunulan ve bildiri kitaplarında basılan bildiriler:
E1. Çörekçioğlu, M. & A. Güngör. “Havsız Kumaş Üretimindeki Dokuma Çizelgeleme Problemine Bir Çözüm Yordamı”, V. Üretim Araştırmaları Sempozyumu, İstanbul, Kasım 2005.
E2. Kordon, E. & A. Güngör. “Endüstri Mühendisliği Uzmanlık Alanlarına Öğrenci Atamak İçin Bir Kariyer Planlama Yaklaşımı”, V. Üretim Araştırmaları Sempozyumu, İstanbul, Kasım 2005.
E3. Çörekçioğlu, M. & A. Güngör. “ERP Yazılımı Seçiminde Analitik Hiyerarşi Sürecinin Kullanımı”, Üretim Araştırmaları Sempozyumu, Konya, Ekim 2004.
E4. Yetkin Ekren, B. & A. Güngör. “Atık Yönetiminde Rotalama Problemi: Denizli İli Kuşpınar Mahallesi Örneği”, Üretim Araştırmaları Sempozyumu, Konya, Ekim 2004.
E5. Kordon, E. & A. Güngör. “Stratejik İnsan Kaynakları Yönetiminde Veri Zarflama Analizinin Kullanımı: Bir Örnek Uygulama”, Üretim Araştırmaları Sempozyumu, Konya, Ekim 2004.
E6. Yetkin Ekren, B. & A. Güngör. "Evsel Katı Atık Toplama Araçlarının Rotalanması: Denizli İli'nde Bir Pilot Çalışma", Yöneylem Araştırması ve Endüstri Mühendisliği 24. Ulusal Kongresi, 16-18 Haziran, Adana, 2004
E7. Aydın, A.O., M. Binatlı & A. Güngör. “Ürün Ağaçlarının (Bills-of-Materials - BOMs) Gösteriminde Etkin Bir Yöntem“, Bilgi Teknolojileri Kongresi II, Denizli, Mayıs 2003.
E8 Ersoy, B., E. Palamutçu, M. Ülkü & A. Güngör. ”Süreç Yaklaşımıyla Elektronik Ortamda Sayısal Yönetim”, Bilgi Teknolojileri Kongresi II, Denizli, Mayıs 2003.
E9. Karagül, K., M. Binatlı & A. Güngör. “ERP'de Çoklu-Ajan Sistemleri ve Üretim Planlamasında Kullanımları” Bilgi Teknolojileri Kongresi II, Denizli, Mayıs 2003.
F1. Güngör, A., Kitap Değerlendirmesi (Disassembly Modeling for Assembly, Maintenance, Reuse, and Recycling by A. J. D. Lambert and Surendra M. Gupta, CRC Press, Boca Raton, 2005, pp. xviii + 419, £44.99, hardcover (ISBN 1-57444-334-8)), International Journal of Production Research, Vol. 43, No. 23, pp. 5101 - 5103.
F2. İkiz, Y., Ö. Mutlu & A. Güngör. Denizli Tekstil-Dokuma/Örme Sektörü Makine Parkı ve Teknoloji Envanteri, Denizli İli İmalat Sanayi Envanteri Serisi 8, Denizli Sanayi Odası, 2005.
F3. İkiz, Y., Ö. Mutlu & A. Güngör. Denizli Tekstil-Konfeksiyon Sektörü Makine Parkı ve Teknoloji Envanteri, Denizli İli İmalat Sanayi Envanteri Serisi 9, Denizli Sanayi Odası, 2005.
F4. İkiz, Y., Ö. Mutlu & A. Güngör. Denizli Tekstil-İplik Sektörü Makine Parkı ve Teknoloji Envanteri, Denizli İli İmalat Sanayi Envanteri Serisi 10, Denizli Sanayi Odası, 2005.
F5. İkiz, Y., Ö. Mutlu & A. Güngör. Denizli Tekstil-Boya/Terbiye Sektörü Makine Parkı ve Teknoloji Envanteri, Denizli İli İmalat Sanayi Envanteri Serisi 11, Denizli Sanayi Odası, 2005.
Atıf Alan Eser
A3. Güngör, A. & S.M. Gupta, “Disassembly line in product recovery”, International Journal of Production Research, 40(11), 2569-2589 (2002).
Atıf Yapan Eserler
1. Aksoy, H.K., & Gupta, S.A. "Buffer allocation plan for a remanufacturing cell". Computers & Industrial Engineering. 48(3), 657-677 (2005).
2. Song, C., Guan, X.H., Zhao, Q.C., & Ho, Y.C. "Machine learning approach for determining feasible plans of a remanufacturing system". Ieee Transactions on Automation Science and Engineering. 2(3), 262-275 (2005).
Atıf Alan Eser
A4. Moore, K.E., A. Güngör & S.M. Gupta, “Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships”, European Journal of Operational Research, 135(2), 428-449 (2001).
Atıf Yapan Eserler
1. Gungor, A., & Gupta, S.M. "Disassembly line in product recovery". International Journal of Production Research. 40(11), 2569-2589 (2002).
2. Lambert, A.J.D. "Disassembly sequencing: a survey". International Journal of Production Research. 41(16), 3721-3759 (2003).
3. Lambert, A.J.D., & Gupta, S.M. "Demand-driven disassembly optimization for electronic products". Journal of Electronics Manufacturing. 11(2), 121-135 (2002).
4. Linton, J.D., & Jayaraman, V. "A framework for identifying differences and similarities in the managerial competencies associated with different modes of product life extension". International Journal of Production Research. 43(9), 1807-1829 (2005).
5. Rai, R., Rai, V., Tiwari, M.K., & Allada, V. "Disassembly sequence generation: a Petri net based heuristic approach". International Journal of Production Research. 40(13), 3183-3198 (2002).
6. Sinanoglu, C., & Borklu, H.R. "An approach to determine geometric feasibility to assembly states by intersection matrices in assembly sequence planning". Journal of Intelligent Manufacturing. 15(4), 543-559 (2004).
Atıf Alan Eser
A5. Güngör, A. & S.M. Gupta, “Disassembly sequence plan generation using a branch-and-bound algorithm”, International Journal of Production Research, 39(3), 481-509 (2001).
Atıf Yapan Eserler
1. Gonzalez, B., & Adenso-Diaz, B. "A scatter search approach to the optimum disassembly sequence problem". Computers & Operations Research. 33(6), 1776-1793 (2006).
2. Gungor, A., & Gupta, S.M. "Disassembly line in product recovery". International Journal of Production Research. 40(11), 2569-2589 (2002).
3. Ketzenberg, M.E., Souza, G.C., & Guide, V.D.R. "Mixed assembly and disassembly operations for remanufacturing". Production and Operations Management. 12(3), 320-335 (2003).
4. Lai, H.Y., & Huang, C.T. "Integrated assembly plan generation system for grouped product families". International Journal of Production Research. 41(17), 4041-4061 (2003).
5. Lai, H.Y., & Huang, C.T. "A systematic approach for automatic assembly sequence plan generation". International Journal of Advanced Manufacturing Technology. 24(9-10), 752-763 (2004).
6. Lambert, A.J.D. "Disassembly sequencing: a survey". International Journal of Production Research. 41(16), 3721-3759 (2003).
7. Pomares, J., Puente, S.T., Torres, F., Candelas, F.A., & Gil, P. "Virtual disassembly of products based on geometric models". Computers in Industry. 55(1), 1-14 (2004).
8. Seliger, G., Franke, C., Ciupek, M., & Basdere, B. "Process and facility planning for mobile phone remanufacturing". Cirp Annals-Manufacturing Technology. 53(2), 9-12 (2004).
9. Seliger, G., Franke, C., Ciupek, M., & Basdere, B. "Process and facility planning for mobile phone remanufacturing". Cirp Annals-Manufacturing Technology. 53(1), 9-12 (2004).
Atıf Alan Eser
A6. Güngör, A. & S.M. Gupta, “A solution approach to the disassembly line balancing problem in the presence of task failures.”, International Journal of Production Research, 39(7), 1427-1467 (2001).
Atıf Yapan Eserler
1. Brander, P., & Forsberg, R. "Cyclic lot scheduling with sequence-dependent set-ups: a heuristic for disassembly processes". International Journal of Production Research. 43(2), 295-310 (2005).
2. Lambert, A.J.D. "Disassembly sequencing: a survey". International Journal of Production Research. 41(16), 3721-3759 (2003).
3. Lambert, A.J.D. "Generation of assembly graphs by systematic analysis of assembly structures". European Journal of Operational Research. 168(3), 932-951 (2006).
Atıf Alan Eser
A7. Gungor, A. & S.M. Gupta, “Issues in environmentally conscious manufacturing and product recovery: a survey”, Computers and Industrial Engineering, 36, 811-853 (1999).
Atıf Yapan Eserler
1. Aksoy, H.K., & Gupta, S.A. "Buffer allocation plan for a remanufacturing cell". Computers & Industrial Engineering. 48(3), 657-677 (2005).
2. Aras, N., Boyaci, T., & Verter, V. "The effect of categorizing returned products in remanufacturing". Iie Transactions. 36(4), 319-331 (2004).
3. Beamon, B.M., & Fernandes, C. "Supply-chain network configuration for product recovery". Production Planning & Control. 15(3), 270-281 (2004).
4. Boon, J.E., Isaacs, J.A., & Gupta, S.M. "Economic sensitivity for end of life planning and processing of personal computers". Journal of Electronics Manufacturing. 11(1), 81-93 (2002).
5. Brander, P., & Forsberg, R. "Cyclic lot scheduling with sequence-dependent set-ups: a heuristic for disassembly processes". International Journal of Production Research. 43(2), 295-310 (2005).
6. Cui, J.R., & Forssberg, E. "Mechanical recycling of waste electric and electronic equipment: a review". Journal of Hazardous Materials. 99(3), 243-263 (2003).
7. Desai, A., & Mital, A. "Evaluation of disassemblability to enable design for disassembly in mass production". International Journal of Industrial Ergonomics. 32(4), 265-281 (2003).
8. Desai, A., & Mital, A. "Review of literature on disassembly algorithms and design for disassembly guidelines for product design". International Journal of Industrial Engineering-Theory Applications and Practice. 10(3), 244-255 (2003).
9. Feldmann, K., Meedt, O., Trautner, S., Scheller, H., & Hoffman, W. "The "Green Design Advisor": A tool for design for environment". Journal of Electronics Manufacturing. 9(1), 17-28 (1999).
10. Feldmann, K., Trautner, S., Lohrmann, H., & Melzer, K. "Computer-based product structure analysis for technical goods regarding optimal end-of-life strategies". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 215(5), 683-693 (2001).
11. Flapper, S.D.P., & Teunter, R.H. "Logistic planning of rework with deteriorating work-in-process". International Journal of Production Economics. 88(1), 51-59 (2004).
12. Gao, M.M., Zhou, M.C., & Caudill, R.J. "Integration of disassembly leveling and bin assignment for demanufacturing automation". Ieee Transactions on Robotics and Automation. 18(6), 867-874 (2002).
13. Gungor, A., & Gupta, S.M. "Disassembly line in product recovery". International Journal of Production Research. 40(11), 2569-2589 (2002).
14. Gungor, A., & Gupta, S.M. "Disassembly sequence plan generation using a branch-and-bound algorithm". International Journal of Production Research. 39(3), 481-509 (2001).
15. Gungor, A., & Gupta, S.M. "A solution approach to the disassembly line balancing problem in the presence of task failures". International Journal of Production Research. 39(7), 1427-1467 (2001).
16. Jung, L.B., & Bartel, T.J. "Computer take-back and recycling: An economic analysis for used consumer equipment". Journal of Electronics Manufacturing. 9(1), 67-77 (1999).
17. Kara, S., Pornprasitpol, R., & Kaebernick, H. "A selective disassembly methodology for end-of-life products". Assembly Automation. 25(2), 124-134 (2005).
18. Kongar, E., & Gupta, S.M. "A multi-criteria decision making approach for disassembly-to-order systems". Journal of Electronics Manufacturing. 11(2), 171-183 (2002).
19. Kongar, E., & Gupta, S.M., Multi-objective optimization of lot size balancing for multi-products selective disassembly, in Multiple Criteria Decision Making in the New Millennium. 2001. p. 338-347.
20. Lambert, A.J.D. "Determining optimum disassembly sequences in electronic equipment". Computers & Industrial Engineering. 43(3), 553-575 (2002).
21. Lambert, A.J.D. "Disassembly sequencing: a survey". International Journal of Production Research. 41(16), 3721-3759 (2003).
22. Lambert, A.J.D., & Gupta, S.M. "Demand-driven disassembly optimization for electronic products". Journal of Electronics Manufacturing. 11(2), 121-135 (2002).
23. Lee, D.H., Kang, J.G., & Xirouchakis, P. "Disassembly planning and scheduling: review and further research". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 215(5), 695-709 (2001).
24. Lee, D.H., Kim, H.J., Choi, G., & Xirouchakis, P. "Disassembly scheduling: integer programming models". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 218(10), 1357-1372 (2004).
25. Lee, D.H., & Xirouchakis, P. "A two-stage heuristic for disassembly scheduling with assembly product structure". Journal of the Operational Research Society. 55(3), 287-297 (2004).
26. Linton, J. "Electronic products at their end-of-life: Options and obstacles". Journal of Electronics Manufacturing. 9(1), 29-40 (1999).
27. Nakashima, K., Arimitsu, H., Nose, T., & Kuriyama, S. "Analysis of a product recovery system". International Journal of Production Research. 40(15), 3849-3856 (2002).
28. Nakashima, K., Arimitsu, H., Nose, T., & Kuriyama, S. "Optimal control of a remanufacturing system". International Journal of Production Research. 42(17), 3619-3625 (2004).
29. Okumura, S., Morikuni, T., & Okino, N. "Environmental effects of physical life span of a reusable unit following functional and physical failures in a remanufacturing system". International Journal of Production Research. 41(16), 3667-3687 (2003).
30. Rahimifard, A., Newman, S.T., & Rahimifard, S. "A web-based information system to support end-of-life product recovery". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 218(9), 1047-1057 (2004).
31. Ravi, V., Shankar, R., & Tiwari, M.K. "Analyzing alternatives in reverse logistics for end-of-life computers: ANP and balanced scorecard approach". Computers & Industrial Engineering. 48(2), 327-356 (2005).
32. Realff, M.J., Newton, D., & Ammons, J.C. "Modeling and decision-making for reverse production system design for carpet recycling". Journal of the Textile Institute. 91, 168-186 (2000).
33. Rios, P., Blyler, L., Tieman, L., Stuart, J.A., & Grant, E. "Symbolic methodology to improve disassembly process design". Environmental Science & Technology. 37(23), 5417-5423 (2003).
34. Rios, P., Stuart, J.A., & Grant, E. "Plastics disassembly versus bulk recycling: Engineering design for end-of-life electronics resource recovery". Environmental Science & Technology. 37(23), 5463-5470 (2003).
35. Rios, P.J., & Stuart, J.A. "Scheduling selective disassembly for plastics recovery in an electronics recycling center". Ieee Transactions on Electronics Packaging Manufacturing. 27(3), 187-197 (2004).
36. Ritchey, J.R., Mahmoodi, F., Frascatore, M.R., & Zander, A.K. "A framework to assess the economic viability of remanufacturing". International Journal of Industrial Engineering-Theory Applications and Practice. 12(1), 89-100 (2005).
37. Rose, C.M., & Ishii, K. "Product end-of-life strategy categorization design tool". Journal of Electronics Manufacturing. 9(1), 41-51 (1999).
38. Rose, C.M., Ishii, K., & Stevels, A. "Influencing design to improve product end-of-life stage". Research in Engineering Design-Theory Applications and Concurrent Engineering. 13(2), 83-93 (2002).
39. Rose, C.M., Stevels, A.B., & Ishii, K. "Method for formulating product end-of-life strategies for electronics industry". Journal of Electronics Manufacturing. 11(2), 185-196 (2002).
40. Santochi, M., Dini, G., & Failli, F. "Computer aided disassembly planning: State of the art and perspectives". Cirp Annals-Manufacturing Technology. 51(2), 507-529 (2002).
41. Sodhi, M.S., & Reimer, B. "Models for recycling electronics end-of-life products". Or Spektrum. 23(1), 97-115 (2001).
42. Spengler, T., Ploog, M., & Schroter, M. "Integrated planning of acquisition, disassembly and bulk recycling: a case study on electronic scrap recovery". Or Spectrum. 25(3), 413-442 (2003).
43. Stuart, J.A., & Christina, V. "New metrics and scheduling rules for disassembly and bulk recycling". Ieee Transactions on Electronics Packaging Manufacturing. 26(2), 133-140 (2003).
44. Sundin, E., & Bras, B. "Making functional sales environmentally and economically beneficial through product remanufacturing". Journal of Cleaner Production. 13(9), 913-925 (2005).
45. Teunter, R.H. "A reverse logistics valuation method for inventory control". International Journal of Production Research. 39(9), 2023-2035 (2001).
46. Torres, F., Gil, P., Puente, S.T., Pomares, J., & Aracil, R. "Automatic PC disassembly for component recovery". International Journal of Advanced Manufacturing Technology. 23(1-2), 39-46 (2004).
47. Tseng, H.E., & Chen, W.S. "A replacement consideration for the end-of-life product in the green life cycle environment". International Journal of Advanced Manufacturing Technology. 24(11-12), 925-931 (2004).
48. van Hillegersberg, J., Zuidwijk, R., van Nunen, J., & van Eijk, D. "Supporting return flows in the supply chain". Communications of the Acm. 44(6), 74-79 (2001).
49. Veerakamolmal, P., & Gupta, S.M. "Analysis of design efficiency for the disassembly of modular electronic products". Journal of Electronics Manufacturing. 9(1), 79-95 (1999).
50. Veerakamolmal, P., & Gupta, S.M. "A case-based reasoning approach for automating disassembly process planning". Journal of Intelligent Manufacturing. 13(1), 47-60 (2002).
51. Viswanathan, S., & Allada, V. "Configuration analysis to support product redesign for end-of-life disassembly". International Journal of Production Research. 39(8), 1733-1753 (2001).
52. Viswanathan, S., & Allada, V. "A framework for the flexible grouping of products for disassembly". Journal of Electronics Manufacturing. 9(1), 53-66 (1999).
53. Wang, J.F., Liu, J.H., Li, S.Q., & Zhong, Y.F. "Intelligent selective disassembly using the ant colony algorithm". Ai Edam-Artificial Intelligence for Engineering Design Analysis and Manufacturing. 17(4-5), 325-333 (2003).
54. Zhang, X.C., Xu, B.S., Wang, H.D., Yi, J., Wu, Y.X., Gong, J.M., & Tu, S.D. "Remanufacturing, strategy for chemical equipment". Journal of Central South University of Technology. 12, 142-144 (2005).
55. Zhou, M.C., Caudill, R.J., & Sebastian, D. "Multi-lifecycle product recovery for electronic products". Journal of Electronics Manufacturing. 9(1), 1-15 (1999).
56. Zuo, B.R., Stenzel, A., & Seliger, G. "A novel disassembly tool with screwnail endeffectors". Journal of Intelligent Manufacturing. 13(3), 157-163 (2002).
Atıf Alan Eser
A8. Moore, K.E., A. Gungor & S.M. Gupta, “A Petri net approach to disassembly process planning”, Computers and Industrial Engineering, 35(1-2), 165-168 (1998).
Atıf Yapan Eserler
1. Cui, J.R., & Forssberg, E. "Mechanical recycling of waste electric and electronic equipment: a review". Journal of Hazardous Materials. 99(3), 243-263 (2003).
2. Dong, J., & Arndt, G. "A review of current research on disassembly sequence generation and computer aided design for disassembly". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 217(3), 299-312 (2003).
3. Erdos, G., Kis, T., & Xirouchakis, P. "Modelling and evaluating product end-of-life options". International Journal of Production Research. 39(6), 1203-1220 (2001).
4. Gao, M.M., Zhou, M.C., & Tang, Y. "Intelligent decision making in disassembly process based on fuzzy reasoning Petri Nets". Ieee Transactions on Systems Man and Cybernetics Part B-Cybernetics. 34(5), 2029-2034 (2004).
5. Gungor, A., & Gupta, S.M. "Disassembly line in product recovery". International Journal of Production Research. 40(11), 2569-2589 (2002).
6. Gungor, A., & Gupta, S.M. "Disassembly sequence plan generation using a branch-and-bound algorithm". International Journal of Production Research. 39(3), 481-509 (2001).
7. Gungor, A., & Gupta, S.M. "Issues in environmentally conscious manufacturing and product recovery: a survey". Computers & Industrial Engineering. 36(4), 811-853 (1999).
8. Gungor, A., & Gupta, S.M. "A solution approach to the disassembly line balancing problem in the presence of task failures". International Journal of Production Research. 39(7), 1427-1467 (2001).
9. Lambert, A.J.D. "Disassembly sequencing: a survey". International Journal of Production Research. 41(16), 3721-3759 (2003).
10. Lee, D.H., Kang, J.G., & Xirouchakis, P. "Disassembly planning and scheduling: review and further research". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 215(5), 695-709 (2001).
11. Moore, K.E., Gungor, A., & Gupta, S.M. "Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships". European Journal of Operational Research. 135(2), 428-449 (2001).
12. Neuendorf, K.P., Lee, D.H., Kiritsis, D., & Xirouchakis, P. "Disassembly scheduling with parts commonality using petri nets with timestamps". Fundamenta Informaticae. 47(3-4), 295-306 (2001).
13. Rai, R., Rai, V., Tiwari, M.K., & Allada, V. "Disassembly sequence generation: a Petri net based heuristic approach". International Journal of Production Research. 40(13), 3183-3198 (2002).
14. Rose, C.M., Stevels, A.B., & Ishii, K. "Method for formulating product end-of-life strategies for electronics industry". Journal of Electronics Manufacturing. 11(2), 185-196 (2002).
15. Santochi, M., Dini, G., & Failli, F. "Computer aided disassembly planning: State of the art and perspectives". Cirp Annals-Manufacturing Technology. 51(2), 507-529 (2002).
16. Sarkis, J. "Manufacturing's role in corporate environmental sustainability - Concerns for the new millennium". International Journal of Operations & Production Management. 21(5-6), 666-686 (2001).
17. Spengler, T., & Schroter, M. "Use of operations research in product-related environmental protection - Present and future". Betriebswirtschaftliche Forschung Und Praxis. 53(3), 227-244 (2001).
18. Tang, Y., Zhou, M.C., Zussman, E., & Caudill, R. "Disassembly modeling, planning, and application". Journal of Manufacturing Systems. 21(3), 200-217 (2002).
19. Tiwari, M.K., Sinha, N., Kumar, S., Rai, R., & Mukhopadhyay, S.K. "A Petri Net based approach to determine the disassembly strategy of a product". International Journal of Production Research. 40(5), 1113-1129 (2002).
20. Zuo, B.R., Stenzel, A., & Seliger, G. "A novel disassembly tool with screwnail endeffectors". Journal of Intelligent Manufacturing. 13(3), 157-163 (2002).
Atıf Alan Eser
A9. Gungor, A. & S.M. Gupta. “Disassembly sequence planning for products with defective parts in product recovery”, Computers and Industrial Engineering, 35(1-2), 161-164 (1998).
Atıf Yapan Eserler
1. Cui, J.R., & Forssberg, E. "Mechanical recycling of waste electric and electronic equipment: a review". Journal of Hazardous Materials. 99(3), 243-263 (2003).
2. Desai, A., & Mital, A. "Evaluation of disassemblability to enable design for disassembly in mass production". International Journal of Industrial Ergonomics. 32(4), 265-281 (2003).
3. Desai, A., & Mital, A. "Review of literature on disassembly algorithms and design for disassembly guidelines for product design". International Journal of Industrial Engineering-Theory Applications and Practice. 10(3), 244-255 (2003).
4. Dong, J., & Arndt, G. "A review of current research on disassembly sequence generation and computer aided design for disassembly". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 217(3), 299-312 (2003).
5. Erdos, G., Kis, T., & Xirouchakis, P. "Modelling and evaluating product end-of-life options". International Journal of Production Research. 39(6), 1203-1220 (2001).
6. Gonzalez, B., & Adenso-Diaz, B. "A bill of materials-based approach for end-of-life decision making in design for the environment". International Journal of Production Research. 43(10), 2071-2099 (2005).
7. Gungor, A., & Gupta, S.M. "Disassembly line in product recovery". International Journal of Production Research. 40(11), 2569-2589 (2002).
8. Gungor, A., & Gupta, S.M. "Issues in environmentally conscious manufacturing and product recovery: a survey". Computers & Industrial Engineering. 36(4), 811-853 (1999).
9. Gungor, A., & Gupta, S.M. "A solution approach to the disassembly line balancing problem in the presence of task failures". International Journal of Production Research. 39(7), 1427-1467 (2001).
10. Kang, J.G., Lee, D.H., & Xirouchakis, P. "Disassembly sequencing with imprecise data: A case study". International Journal of Industrial Engineering-Theory Applications and Practice. 10(4), 407-412 (2003).
11. Kongar, E., & Gupta, S.M. "A multi-criteria decision making approach for disassembly-to-order systems". Journal of Electronics Manufacturing. 11(2), 171-183 (2002).
12. Lambert, A.J.D. "Disassembly sequencing: a survey". International Journal of Production Research. 41(16), 3721-3759 (2003).
13. Lee, D.H., Kang, J.G., & Xirouchakis, P. "Disassembly planning and scheduling: review and further research". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 215(5), 695-709 (2001).
14. Tang, Y., Zhou, M.C., Zussman, E., & Caudill, R. "Disassembly modeling, planning, and application". Journal of Manufacturing Systems. 21(3), 200-217 (2002).
Atıf Alan Eser
A10. Gungor, A. & S.M. Gupta, “An evaluation methodology for disassembly processes”, Computers and Industrial Engineering, 33(1-2), 329-332 (1997).
Atıf Yapan Eserler
1. Das, S.K., & Naik, S. "Process planning for product disassembly". International Journal of Production Research. 40(6), 1335-1355 (2002).
2. Das, S.K., Yedlarajiah, P., & Narendra, R. "An approach for estimating the end-of-life product disassembly effort and cost". International Journal of Production Research. 38(3), 657-673 (2000).
3. Desai, A., & Mital, A. "Evaluation of disassemblability to enable design for disassembly in mass production". International Journal of Industrial Ergonomics. 32(4), 265-281 (2003).
4. Desai, A., & Mital, A. "Review of literature on disassembly algorithms and design for disassembly guidelines for product design". International Journal of Industrial Engineering-Theory Applications and Practice. 10(3), 244-255 (2003).
5. Gonzalez, B., & Adenso-Diaz, B. "A scatter search approach to the optimum disassembly sequence problem". Computers & Operations Research. 33(6), 1776-1793 (2006).
6. Gungor, A., & Gupta, S.M. "Disassembly line in product recovery". International Journal of Production Research. 40(11), 2569-2589 (2002).
7. Gungor, A., & Gupta, S.M. "Disassembly sequence plan generation using a branch-and-bound algorithm". International Journal of Production Research. 39(3), 481-509 (2001).
8. Gungor, A., & Gupta, S.M. "Issues in environmentally conscious manufacturing and product recovery: a survey". Computers & Industrial Engineering. 36(4), 811-853 (1999).
9. Gungor, A., & Gupta, S.M. "A solution approach to the disassembly line balancing problem in the presence of task failures". International Journal of Production Research. 39(7), 1427-1467 (2001).
10. Huang, Y.M., & Huang, C.T. "Disassembly matrix for disassembly processes of products". International Journal of Production Research. 40(2), 255-273 (2002).
11. Hula, A., Jalali, K., Hamza, K., Skerlos, S.J., & Saitou, K. "Multi-criteria decision-making for optimization of product disassembly under multiple situations". Environmental Science & Technology. 37(23), 5303-5313 (2003).
12. Kongar, E., & Gupta, S.M. "A multi-criteria decision making approach for disassembly-to-order systems". Journal of Electronics Manufacturing. 11(2), 171-183 (2002).
13. Lambert, A.J.D. "Disassembly sequencing: a survey". International Journal of Production Research. 41(16), 3721-3759 (2003).
14. Moore, K.E., Gungor, A., & Gupta, S.M. "Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships". European Journal of Operational Research. 135(2), 428-449 (2001).
15. Pomares, J., Puente, S.T., Torres, F., Candelas, F.A., & Gil, P. "Virtual disassembly of products based on geometric models". Computers in Industry. 55(1), 1-14 (2004).
Copyright © 2002 by Aşkıner Güngör. All rights reserved.
Last Update on [12.04.2006 ]